YPEEN is an alginate impression material used in dental prosthetics and orthodontics.
Mixing ratio: 20 ml of water : 10 g of powder First measure water with the enclosed measuring scoop and pour it into the mixing bowl.
Shake alginate powder well before use!
Then dose the powder with the enclosed measuring scoop without compression into the mixing bowl. Mix water and powder thoroughly with a plastic spatula along the mixing bowl walls.
- Partial dentures
- Preliminary impressions for fabricating of individual impression trays
- Antagonist models
- Temporary crowns and bridges
- Reparation of removable restorations
Mixing time Ypeen:
- 30 seconds
Working time Ypeen:
- 2 : 00 min at 23 °C (including mixing time)
- 2 : 30 min at 23 °C (including mixing time)
Disinfection: In aqueous disinfection solutions, e.g. JODISOL solution at a 1 : 10 ratio (30 sec.) after rinsing with water.
Impression storage: Immediate pouring is recommended, max. up to 4 hours in 100% humidity.
Cast material: Gypsum products (e.g. MRAMORIT, CONVERTIN HART)
Note: For the preparation of the alginate impression material distilled or demineralized water at 23 °C is recommended. At higher temperatures and water hardness the working time and the setting time is reduced.
Warning: H302 Harmful if swallowed. H312 Harmful in contact with skin. H332 Harmful if inhaled. H319 Causes serious eye irritation. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure.
P270 Do not eat, drink or smoke when using this product. P271 Use only outdoors or in a well-ventilated area. P281 Use personal protective equipment as required.
Disposal of waste: The empty package and unused material can be disposed off together with ordinary waste produced at the worksite.
Storage: Store in a dry and dark place at 5 °C to 25 °C, in a well sealed container. Shelf life: 2 years Package : 800 g in a plastic container 7 x 450 g – in bags.
ORTHOPRINT – DUST-FREE ALGINATES FOR IMPRESSIONS
IMPREGUM PENTA SOFT QUICK (3M ESPE) – IMPRESSION MATERIAL